Type and meaning1. Enterprise Code: Changjiu Electronics2. Serial Number3. Number of contact groups: one,two4. H-normally open contact Contact Form: Z-conversion type D-normally closed contact5. mounted type: P:PCB mounted type No Letters: plug-in moudted6. operating state:L:LED indicate No Letters:......
1. Enterprise Code: Changjiu Electronics
2. Serial Number
3. Number of contact groups: one,two
4. H-normally open contact Contact Form: Z-conversion type D-normally closed contact
5. mounted type: P:PCB mounted type No Letters: plug-in moudted
6. operating state:L:LED indicate No Letters:no indicate
7. auxiliary, function : T-Cover plate type G-mechanical indicate D/CR-Inhibitory protection
8. Coil Voltage:DCis for direct voltage AC is for alternating voltage
Contact parameters |
Contact Form |
1Z,1H,1D 2Z,2H,2D |
|
Contact load |
12A/250VAC,30VDC 8A/250VAC,30VDC |
||
Switching power |
3000VA,360W 2000VA,240W |
||
Contact Resistance |
≤100mΩ |
||
Contact Materia |
Ag alloy |
||
Electrical life |
1×10⁵ |
||
Mechanical life |
AC:3×106 |
||
Pick -up Voltage |
DC:≤75%,AC:≤80%50/60Hz |
||
Drop-out Voltage |
DC:≥10%,AC:≥30%50/60Hz |
||
Max Voltage |
110% |
||
Coil voltage |
DC (W) |
0.53 |
|
AC(VA |
0.9 |
||
Suction time |
≤20ms |
||
Release time |
AC |
≤20ms |
|
DC |
≤10ms |
||
Insulation Resistance |
≥1000MΩ (500VDC) |
||
Dielectric Strength |
Between the same pole contacts |
1200VAC/1min(Leakage current) |
|
Between polar contacts |
1500VAC/1min(Leakage current) |
||
Between contact and coil |
2500VAC/1min(Leakage current) |
||
Ambient temperature |
-25℃+55℃ |
||
Ambient humidity |
5%~85%RH |
||
Atmospheric pressure |
86~106KPa |
||
Impact resistance |
10G(Sine half wave pulse:11ms) |
||
Vibration resistance |
10~55Hz Double amplitude:1.0mm |
||
mounted type |
plug-in moudted |
||
weight |
around 20g |