Take CJCPS as a switch, combined with contactors, electrical interlocks and other accessories to form CJCPSD Electrical Control Box (double speed electric controller), suitable for control and protection of double-speed motor.
Take CJCPS as a switch, combined with contactors, electrical interlocks and other accessories to form CJCPSD Electrical Control Box (double speed electric controller), suitable for control and protection of double-speed motor.
Configurations of CJCPSD Electrical Control Box have three kinds:
Configuration 1: high-speed is the fire-type (overload, over-current with alarm and no trip), low-speed is the basic type;
Configuration 2: high, low speed are basic type;
Configuration 3: high, low speed are fire type (should specify the special order).
Features, the main circuit parameters and accessories module are the same as the basic type.
Note:
① This graph is suitable for the operation control of all kinds of CJCPS Electrical Control Box, use both local and remote manual control.
② Control protector for high-speed smoke exhaust (2KBO), can choose fire type products, with functions of overload, over-current to only alarm not trip, short circuit to trip, to continue to work when overload. Secondary control schematic is in common use.
③ Introduced high and low speed start-stop button group can be installed on the box surface or wall.
④ The SQ, as the fire valve limit switch, the action device stops running; Short circuit occurs in the line without the fire valve limit switch.
No. |
Symbol |
Name |
Models and Specifications |
Quantity |
Remark |
1 |
FU |
Fuses |
RT18-32X/4A |
1 |
With fuse indication |
2 |
CPS1.2 |
Control protector |
CPS-□□/□□/□□□ |
2 |
See Selection Chart |
3 |
HG1.2 |
Green light |
AD11-22/20~220V |
2 |
Increase or decrease as required |
4 |
HR1.2 |
Red light |
AD11-22/20~220V |
2 |
Increase or decrease as required |
5 |
HB1.2 |
Blue light |
AD11-22/20~220V |
2 |
Increase or decrease as required |
6 |
HY1.2 |
Yellow light |
AD11-22/20~220V |
2 |
Increase or decrease as required |
7 |
HW |
White light |
AD11-22/20~220V |
1 |
Increase or decrease as required |
8 |
SF1.2,SS1. |
High and low speed start-stop button |
LAY(1 normally open and 1 normally closed) |
3 |
One each for red, green and yellow |
9 |
SF3.4,SS2. |
Introduced high and low speed start-stop button group |
Decided by engineering design |
1 |
|