100a 2 Pole Isolator Switch

100a 2 Pole Isolator Switch is used for AC 50Hz or 60Hz, the power distribution and control circuit of rated voltage 230V or 400V and below, the current to the top of the power distribution device and 100A between the No load division.

100a 2 Pole Isolator Switch Details

installation and usage

■ Before installing HL30 electrical isolator switch, check whether the switch is in accordance with the actual operating conditions.

■ Installing into the installation rail according to the graphical position, the handle push-up means making, indication sign is red; handle pull-down means breaking, indication sign is green.

■ The power supply line is accessed from the top of the switch and connect the outlet from the bottom, copper wire should be tightened, should not be loose , or copper wire is exposed outside the terminal.

■ Before power-on, there are switches manually operate several times in advance, it should be flexible and reliable and has no blocking phenomenon.

■ HL30 electrical isolator switch should not be affected by rain in the use, storage, transportation and other processes.

■ HL30 electrical isolator switch can carry (short-circuit) current under abnormal circuit condition for a certain period of time, or it can be appropriate overload of less frequent making-breaking , but it can not be used for breaking fault current.

Scope of Application

NHL30 Electrical Isolation Switch is used for AC 50Hz or 60Hz, the power distribution and control circuit of rated voltage 230V or 400V and below, the current to the top of the power distribution device and 100A between the No load division. Mainly as the total switch of electrical terminal appliances, electrical isolator switch can also be used to control all types of motors, low-power electrical appliances, lighting and other places. Mechanical and electrical life have 10,000 times, of which electrical life has 6000 times.

NHL30 electrical isolator switch meets GB14048.3 and IEC947-3 and other standards.

Use environment and working conditions

◆ ambient air temperature -5 degrees Celsius to +40 degrees Celsius, the average temperature does not exceed +35 degrees Celsius.

◆ altitude of not more than 2000m.

◆ the relative humidity of the atmosphere +40 measures not more than 50%, the wettest month is 90%.

◆ pollution level II.

◆ Use category AC-22A.

◆ installation form using TH35-7.5 steel installation rail installation, other surface and the vertical inclination of the body is not directly over five degrees.

Main technical parameters

Ordering Information

When ordering, please indicate the following points:

Product model and name: Such as NHL30 electrical isolator switch

Rated current: 100A.

Number of poles: 3P

Order number: such as 8888 only.

Order example: NHL30 electrical isolator switch with lock, 100A, 3P, 777 only.

Keywords: electrical isolator switch